Isuzu D-Max (2021-2025) EGR AUTO EGR Dust Defender - Isuzu D-Max 2020-2023
EGR Dust Defender - Isuzu D-Max 2020-2023
- Market leader in Dust Defenders
- Black powdercoat steel side and floor bracing with rubber seals
- Combats any dust or water entering your tray
- Robust & hard-wearing
Product Info
Suits July 2020 - April 2024
Keep your Isuzu D-Max tub free from dust and water with the EGR Dust Defender Kit, purpose-built for the 2020-2023 models. This premium accessory is engineered to seal off the large gaps around the tailgate opening, delivering robust protection against the elements and keeping your load area clean, dry, and ready for the Aussie outback.
Featuring black powder-coated steel side and floor bracing with heavy-duty rubber seals, the Dust Defender combines rugged durability with refined fitment. It’s built for real world use—whether you’re on site, on the road, or off track.
Installation is straightforward, but please note: trimming of tub liner is required, and the kit requires metal-to-metal contact for full effect. Spray-on liners may affect fitment and the MY24 tailgate assist version may be incompatible.
As an Australian-engineered accessory from trusted brand EGR, this kit gives you the peace of mind that your tray area stays sealed and suited to Aussie conditions. Upgrade your D-Max today and enjoy smarter protection.
- NOTE -
-> Requires trimming of Tub Liner for fitment
-> Does not fit MY24 model with Tailgate Assist
-> Fitment with 'spray on' liners will affect fitment of this product.
This product requires a metal to metal application (the kit against your tub). Liners need to be trimmed back to allow this contact - and spray liners may not be able to easily be trimmed.
-> Removal of other items fitted to the top of your tub is also recommended when fitting this product (remove Canopy/Hard Lid/Rollcover - fit the dust kit, then re-fit the Canopy/Hard Lid/EGR RollTrac - as it's easier to trim your ute liner by removing it completely, then re-fitting it inside your Tub)
Features
COMBAT DUST & WATER
ROBUST
SUPERIOR SEAL
Delivery & Fitment
Installation
Fitting InstructionsFAQs
I am concerned that if I install an EGR Dust Defender that my fridge draw slide will no longer operate. Will this be an issue?
The EGR Dust Defender once installed is roughly 24.5mm high. This is normally lower than the ribs inside the tailgate which means the draw slide sits higher. If you are still concerned we recommend placing a thin rubber mat under your draw slider to raise the height by a few millimetres. This also gives an extra layer of protection for your vehicle's tub.
Since installing my EGR Dust Defender I have noticed my tailgate is harder to open and close. Is this normal?
Yes. In order to get the dust out the seal must have pressure up against the tailgate. This is to ensure the tightest seal is made to ensure minimal dust can get in.
I have a Tubliner, is the EGR Dust Defender compatible?
Yes, with conditions.The EGR Dust Defender requires metal on metal contact in order for the seal to work. If you have a clip in a plastic Tub Liner it will require trimming (explains how with our fitting instructions). If you have a spray on Ute Liner you would need to remove the Tubliner in the areas required.
Will the EGR Dust Defender work if I do not modify the Tubliner?
The EGR Dust Defender is engineered to suit each vehicle tub based on no Tub Liner. If the Tubliner is not trimmed this can result in the parts not fitting correctly during installation. As the EGR Dust Defender also requires metal on metal contact to form the best seal it can. Tub Liners are a textured surface which has seam divots, meaning that seal will be less effective and this is not recommended.
Can I install a Dust Defender with existing draws or fridge?
If yoiu have existing draws, fridge or other accessory, this will need to be removed prior to fitting the Dust Defender. This is due to the angles being too tight to install. If you have questions about your particular tub setup, please let us know.
Leadtime
EGR Auto For Australian Conditions - Proudly distributed by PPD Performance Please note, these are made to order - generally 3-4 weeks lead time
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Isuzu D-Max (2021-2025) EGR AUTO EGR Dust Defender - Isuzu D-Max 2020-2023
Isuzu D-Max (2021-2025) EGR AUTO EGR Dust Defender - Isuzu D-Max 2020-2023
EGR Dust Defender - Isuzu D-Max 2020-2023
- Market leader in Dust Defenders
- Black powdercoat steel side and floor bracing with rubber seals
- Combats any dust or water entering your tray
- Robust & hard-wearing
Product Info
Suits July 2020 - April 2024
Keep your Isuzu D-Max tub free from dust and water with the EGR Dust Defender Kit, purpose-built for the 2020-2023 models. This premium accessory is engineered to seal off the large gaps around the tailgate opening, delivering robust protection against the elements and keeping your load area clean, dry, and ready for the Aussie outback.
Featuring black powder-coated steel side and floor bracing with heavy-duty rubber seals, the Dust Defender combines rugged durability with refined fitment. It’s built for real world use—whether you’re on site, on the road, or off track.
Installation is straightforward, but please note: trimming of tub liner is required, and the kit requires metal-to-metal contact for full effect. Spray-on liners may affect fitment and the MY24 tailgate assist version may be incompatible.
As an Australian-engineered accessory from trusted brand EGR, this kit gives you the peace of mind that your tray area stays sealed and suited to Aussie conditions. Upgrade your D-Max today and enjoy smarter protection.
- NOTE -
-> Requires trimming of Tub Liner for fitment
-> Does not fit MY24 model with Tailgate Assist
-> Fitment with 'spray on' liners will affect fitment of this product.
This product requires a metal to metal application (the kit against your tub). Liners need to be trimmed back to allow this contact - and spray liners may not be able to easily be trimmed.
-> Removal of other items fitted to the top of your tub is also recommended when fitting this product (remove Canopy/Hard Lid/Rollcover - fit the dust kit, then re-fit the Canopy/Hard Lid/EGR RollTrac - as it's easier to trim your ute liner by removing it completely, then re-fitting it inside your Tub)
Features
COMBAT DUST & WATER
ROBUST
SUPERIOR SEAL
Delivery & Fitment
Installation
Fitting InstructionsFAQs
I am concerned that if I install an EGR Dust Defender that my fridge draw slide will no longer operate. Will this be an issue?
The EGR Dust Defender once installed is roughly 24.5mm high. This is normally lower than the ribs inside the tailgate which means the draw slide sits higher. If you are still concerned we recommend placing a thin rubber mat under your draw slider to raise the height by a few millimetres. This also gives an extra layer of protection for your vehicle's tub.
Since installing my EGR Dust Defender I have noticed my tailgate is harder to open and close. Is this normal?
Yes. In order to get the dust out the seal must have pressure up against the tailgate. This is to ensure the tightest seal is made to ensure minimal dust can get in.
I have a Tubliner, is the EGR Dust Defender compatible?
Yes, with conditions.The EGR Dust Defender requires metal on metal contact in order for the seal to work. If you have a clip in a plastic Tub Liner it will require trimming (explains how with our fitting instructions). If you have a spray on Ute Liner you would need to remove the Tubliner in the areas required.
Will the EGR Dust Defender work if I do not modify the Tubliner?
The EGR Dust Defender is engineered to suit each vehicle tub based on no Tub Liner. If the Tubliner is not trimmed this can result in the parts not fitting correctly during installation. As the EGR Dust Defender also requires metal on metal contact to form the best seal it can. Tub Liners are a textured surface which has seam divots, meaning that seal will be less effective and this is not recommended.
Can I install a Dust Defender with existing draws or fridge?
If yoiu have existing draws, fridge or other accessory, this will need to be removed prior to fitting the Dust Defender. This is due to the angles being too tight to install. If you have questions about your particular tub setup, please let us know.
Leadtime
EGR Auto For Australian Conditions - Proudly distributed by PPD Performance Please note, these are made to order - generally 3-4 weeks lead time
Original: $247.55
-65%$247.55
$86.64Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
EGR Dust Defender - Isuzu D-Max 2020-2023
- Market leader in Dust Defenders
- Black powdercoat steel side and floor bracing with rubber seals
- Combats any dust or water entering your tray
- Robust & hard-wearing
Product Info
Suits July 2020 - April 2024
Keep your Isuzu D-Max tub free from dust and water with the EGR Dust Defender Kit, purpose-built for the 2020-2023 models. This premium accessory is engineered to seal off the large gaps around the tailgate opening, delivering robust protection against the elements and keeping your load area clean, dry, and ready for the Aussie outback.
Featuring black powder-coated steel side and floor bracing with heavy-duty rubber seals, the Dust Defender combines rugged durability with refined fitment. It’s built for real world use—whether you’re on site, on the road, or off track.
Installation is straightforward, but please note: trimming of tub liner is required, and the kit requires metal-to-metal contact for full effect. Spray-on liners may affect fitment and the MY24 tailgate assist version may be incompatible.
As an Australian-engineered accessory from trusted brand EGR, this kit gives you the peace of mind that your tray area stays sealed and suited to Aussie conditions. Upgrade your D-Max today and enjoy smarter protection.
- NOTE -
-> Requires trimming of Tub Liner for fitment
-> Does not fit MY24 model with Tailgate Assist
-> Fitment with 'spray on' liners will affect fitment of this product.
This product requires a metal to metal application (the kit against your tub). Liners need to be trimmed back to allow this contact - and spray liners may not be able to easily be trimmed.
-> Removal of other items fitted to the top of your tub is also recommended when fitting this product (remove Canopy/Hard Lid/Rollcover - fit the dust kit, then re-fit the Canopy/Hard Lid/EGR RollTrac - as it's easier to trim your ute liner by removing it completely, then re-fitting it inside your Tub)
Features
COMBAT DUST & WATER
ROBUST
SUPERIOR SEAL
Delivery & Fitment
Installation
Fitting InstructionsFAQs
I am concerned that if I install an EGR Dust Defender that my fridge draw slide will no longer operate. Will this be an issue?
The EGR Dust Defender once installed is roughly 24.5mm high. This is normally lower than the ribs inside the tailgate which means the draw slide sits higher. If you are still concerned we recommend placing a thin rubber mat under your draw slider to raise the height by a few millimetres. This also gives an extra layer of protection for your vehicle's tub.
Since installing my EGR Dust Defender I have noticed my tailgate is harder to open and close. Is this normal?
Yes. In order to get the dust out the seal must have pressure up against the tailgate. This is to ensure the tightest seal is made to ensure minimal dust can get in.
I have a Tubliner, is the EGR Dust Defender compatible?
Yes, with conditions.The EGR Dust Defender requires metal on metal contact in order for the seal to work. If you have a clip in a plastic Tub Liner it will require trimming (explains how with our fitting instructions). If you have a spray on Ute Liner you would need to remove the Tubliner in the areas required.
Will the EGR Dust Defender work if I do not modify the Tubliner?
The EGR Dust Defender is engineered to suit each vehicle tub based on no Tub Liner. If the Tubliner is not trimmed this can result in the parts not fitting correctly during installation. As the EGR Dust Defender also requires metal on metal contact to form the best seal it can. Tub Liners are a textured surface which has seam divots, meaning that seal will be less effective and this is not recommended.
Can I install a Dust Defender with existing draws or fridge?
If yoiu have existing draws, fridge or other accessory, this will need to be removed prior to fitting the Dust Defender. This is due to the angles being too tight to install. If you have questions about your particular tub setup, please let us know.
Leadtime
EGR Auto For Australian Conditions - Proudly distributed by PPD Performance Please note, these are made to order - generally 3-4 weeks lead time
