Nissan Navara (2015-On) D23 NP300 Leaf Rear 7/2015-On Roadsafe Blackhawk Upper Control Arm Kit
Nissan Navara (2015-On) D23 NP300 Leaf Rear 7/2015-On Roadsafe Blackhawk Upper Control Arm Kit
UCA4981NV2
When a vehicle is equipped with raised suspension, it can disrupt the factory-set geometry, leading to issues such as reduced caster, bump steer, and clearance conflicts with other suspension components.
Roadsafe 4WD has engineered the Blackhawk UCA range, leveraging extensive experience in the manufacture and supply of chassis parts, including a comprehensive selection of steering and suspension components.
Key features include a fixed caster correction of 3 degrees, which provides a substantial amount of caster adjustment. This design allows for the utilization of factory settings to fine-tune the caster necessary for the vehicle's lift, ensuring that the UCA does not limit increased droop in relation to other components.
The fixed position ball joint is designed with housings rotated to prevent it from being a limiting factor during maximum down travel, enhancing overall suspension performance.
Additionally, the offset type UCA improves clearance to other suspension components and the chassis, accommodating larger wheel and tire setups without interference.
Our design incorporates OE specification ball joints and bushings, facilitating straightforward replacement or maintenance as needed. Furthermore, tabs and mounts are included to secure ABS lines where applicable.
Heavy-duty, long-life ball joints equipped with dust caps ensure durability and reliability in demanding conditions. All components are designed to meet ADR compliance standards.
Please note that images provided are for representation purposes only and may not correspond to the specific part number being viewed.
Features of Blackhawk UCA Range
- 3 degrees of fixed Caster correction providing a bulk, fixed amount of caster.
- Fixed position ball joint with housings rotated to ensure maximum down travel.
- Offset type UCA allows improved clearance to other suspension components and chassis.
- Improved clearance with larger wheel and tyre setup.
- Utilises OE specification ball joint & bushings for easy replacement or maintenance.
- Tabs and mounts to secure ABS lines where applicable.
- Heavy Duty Long life Ball joints with dust cap.
- Designed to meet ADR Compliance.
Additional Information
- Please note images are only a representation of the parts and may not necessarily be the image of the part number you are viewing.
Blackhawk4X4 Upper Control arms have been developed as an aftermarket solution to compliment raised suspension
Does not achieve factory camber specs on D40 models with 1 OE camber bolt
High quality 4x4 suspension upgrades proudly sold by PPD Performance.
Shipping Policy
PPD Performance offer custom built suspension solutions, with unique adjustability and performance.
These kits are assembled to order to suit your requirements, with an average lead time that can vary between 1-3 days.
If you need a specific eta, please contact us before ordering and we will be sure to assist you.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Nissan Navara (2015-On) D23 NP300 Leaf Rear 7/2015-On Roadsafe Blackhawk Upper Control Arm Kit
Nissan Navara (2015-On) D23 NP300 Leaf Rear 7/2015-On Roadsafe Blackhawk Upper Control Arm Kit
Nissan Navara (2015-On) D23 NP300 Leaf Rear 7/2015-On Roadsafe Blackhawk Upper Control Arm Kit
UCA4981NV2
When a vehicle is equipped with raised suspension, it can disrupt the factory-set geometry, leading to issues such as reduced caster, bump steer, and clearance conflicts with other suspension components.
Roadsafe 4WD has engineered the Blackhawk UCA range, leveraging extensive experience in the manufacture and supply of chassis parts, including a comprehensive selection of steering and suspension components.
Key features include a fixed caster correction of 3 degrees, which provides a substantial amount of caster adjustment. This design allows for the utilization of factory settings to fine-tune the caster necessary for the vehicle's lift, ensuring that the UCA does not limit increased droop in relation to other components.
The fixed position ball joint is designed with housings rotated to prevent it from being a limiting factor during maximum down travel, enhancing overall suspension performance.
Additionally, the offset type UCA improves clearance to other suspension components and the chassis, accommodating larger wheel and tire setups without interference.
Our design incorporates OE specification ball joints and bushings, facilitating straightforward replacement or maintenance as needed. Furthermore, tabs and mounts are included to secure ABS lines where applicable.
Heavy-duty, long-life ball joints equipped with dust caps ensure durability and reliability in demanding conditions. All components are designed to meet ADR compliance standards.
Please note that images provided are for representation purposes only and may not correspond to the specific part number being viewed.
Features of Blackhawk UCA Range
- 3 degrees of fixed Caster correction providing a bulk, fixed amount of caster.
- Fixed position ball joint with housings rotated to ensure maximum down travel.
- Offset type UCA allows improved clearance to other suspension components and chassis.
- Improved clearance with larger wheel and tyre setup.
- Utilises OE specification ball joint & bushings for easy replacement or maintenance.
- Tabs and mounts to secure ABS lines where applicable.
- Heavy Duty Long life Ball joints with dust cap.
- Designed to meet ADR Compliance.
Additional Information
- Please note images are only a representation of the parts and may not necessarily be the image of the part number you are viewing.
Blackhawk4X4 Upper Control arms have been developed as an aftermarket solution to compliment raised suspension
Does not achieve factory camber specs on D40 models with 1 OE camber bolt
High quality 4x4 suspension upgrades proudly sold by PPD Performance.
Shipping Policy
PPD Performance offer custom built suspension solutions, with unique adjustability and performance.
These kits are assembled to order to suit your requirements, with an average lead time that can vary between 1-3 days.
If you need a specific eta, please contact us before ordering and we will be sure to assist you.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Nissan Navara (2015-On) D23 NP300 Leaf Rear 7/2015-On Roadsafe Blackhawk Upper Control Arm Kit
UCA4981NV2
When a vehicle is equipped with raised suspension, it can disrupt the factory-set geometry, leading to issues such as reduced caster, bump steer, and clearance conflicts with other suspension components.
Roadsafe 4WD has engineered the Blackhawk UCA range, leveraging extensive experience in the manufacture and supply of chassis parts, including a comprehensive selection of steering and suspension components.
Key features include a fixed caster correction of 3 degrees, which provides a substantial amount of caster adjustment. This design allows for the utilization of factory settings to fine-tune the caster necessary for the vehicle's lift, ensuring that the UCA does not limit increased droop in relation to other components.
The fixed position ball joint is designed with housings rotated to prevent it from being a limiting factor during maximum down travel, enhancing overall suspension performance.
Additionally, the offset type UCA improves clearance to other suspension components and the chassis, accommodating larger wheel and tire setups without interference.
Our design incorporates OE specification ball joints and bushings, facilitating straightforward replacement or maintenance as needed. Furthermore, tabs and mounts are included to secure ABS lines where applicable.
Heavy-duty, long-life ball joints equipped with dust caps ensure durability and reliability in demanding conditions. All components are designed to meet ADR compliance standards.
Please note that images provided are for representation purposes only and may not correspond to the specific part number being viewed.
Features of Blackhawk UCA Range
- 3 degrees of fixed Caster correction providing a bulk, fixed amount of caster.
- Fixed position ball joint with housings rotated to ensure maximum down travel.
- Offset type UCA allows improved clearance to other suspension components and chassis.
- Improved clearance with larger wheel and tyre setup.
- Utilises OE specification ball joint & bushings for easy replacement or maintenance.
- Tabs and mounts to secure ABS lines where applicable.
- Heavy Duty Long life Ball joints with dust cap.
- Designed to meet ADR Compliance.
Additional Information
- Please note images are only a representation of the parts and may not necessarily be the image of the part number you are viewing.
Blackhawk4X4 Upper Control arms have been developed as an aftermarket solution to compliment raised suspension
Does not achieve factory camber specs on D40 models with 1 OE camber bolt
High quality 4x4 suspension upgrades proudly sold by PPD Performance.
Shipping Policy
PPD Performance offer custom built suspension solutions, with unique adjustability and performance.
These kits are assembled to order to suit your requirements, with an average lead time that can vary between 1-3 days.
If you need a specific eta, please contact us before ordering and we will be sure to assist you.
