Toyota Prado (2024-On) 250 Series 2024-Onwards Roadsafe Blackhawk Upper Control Arm Kit
Toyota Prado (2024-On) 250 Series 2024-Onwards Roadsafe Blackhawk Upper Control Arm Kit
UCA4861P
When a vehicle is equipped with raised suspension, it can disrupt the factory-set geometry, leading to issues such as reduced caster, bump steer, and clearance conflicts with other suspension components. To address these challenges, Roadsafe 4WD has engineered the Blackhawk Upper Control Arm (UCA) range, leveraging extensive experience in the manufacture and supply of chassis parts, including a comprehensive selection of steering and suspension components.
Key features of the Blackhawk UCA include fixed caster correction, which provides a substantial, fixed amount of caster. This design allows for the utilization of factory adjustments to fine-tune the caster necessary for the vehicle's lift, ensuring that the UCA does not limit increased droop in relation to other components.
The fixed position ball joint is designed with housings rotated to prevent it from being the limiting factor during maximum down travel. Additionally, the offset type UCA enhances clearance to other suspension components and the chassis, accommodating larger wheel and tire setups.
These UCAs utilize OE specification ball joints and bushings, facilitating straightforward replacement or maintenance as needed. Furthermore, they feature tabs and mounts to secure ABS lines where applicable, ensuring a clean and organized installation.
Constructed with heavy-duty, long-life ball joints equipped with dust caps, these components are designed to meet Australian Design Rules (ADR) compliance, ensuring reliability and performance in demanding conditions.
For visual reference, please note that images are representative of the parts and may not correspond directly to the specific part number being viewed.
Features of Blackhawk UCA Range
- Fixed Caster correction providing a bulk, fixed amount of caster
- Ability to utilise the factory adjustment to fine tune the caster required for the vehicles lift
- Fixed position ball joint with housings rotated for maximum down travel
- Offset type UCA allows improved clearance to other suspension components and chassis
- Improved clearance with larger wheel and tyre setup
- Utilises OE specification ball joint & bushings for easy replacement or maintenance
- Tabs and mounts to secure ABS lines where applicable
- Heavy Duty Long Life Ball joints with dust cap
- Designed to meet ADR Compliance
Additional Information
- Please note images are only a representation of the parts and may not necessarily be the image of the part number you are viewing.
Blackhawk 4X4 Upper Control arms have been developed as an aftermarket solution to compliment raised suspension
High quality 4x4 suspension upgrades proudly sold by PPD Performance.
Shipping Policy
PPD Performance offer custom built suspension solutions, with unique adjustability and performance.
These kits are assembled to order to suit your requirements, with an average lead time that can vary between 1-3 days.
If you need a specific eta, please contact us before ordering and we will be sure to assist you.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Toyota Prado (2024-On) 250 Series 2024-Onwards Roadsafe Blackhawk Upper Control Arm Kit
Toyota Prado (2024-On) 250 Series 2024-Onwards Roadsafe Blackhawk Upper Control Arm Kit
Toyota Prado (2024-On) 250 Series 2024-Onwards Roadsafe Blackhawk Upper Control Arm Kit
UCA4861P
When a vehicle is equipped with raised suspension, it can disrupt the factory-set geometry, leading to issues such as reduced caster, bump steer, and clearance conflicts with other suspension components. To address these challenges, Roadsafe 4WD has engineered the Blackhawk Upper Control Arm (UCA) range, leveraging extensive experience in the manufacture and supply of chassis parts, including a comprehensive selection of steering and suspension components.
Key features of the Blackhawk UCA include fixed caster correction, which provides a substantial, fixed amount of caster. This design allows for the utilization of factory adjustments to fine-tune the caster necessary for the vehicle's lift, ensuring that the UCA does not limit increased droop in relation to other components.
The fixed position ball joint is designed with housings rotated to prevent it from being the limiting factor during maximum down travel. Additionally, the offset type UCA enhances clearance to other suspension components and the chassis, accommodating larger wheel and tire setups.
These UCAs utilize OE specification ball joints and bushings, facilitating straightforward replacement or maintenance as needed. Furthermore, they feature tabs and mounts to secure ABS lines where applicable, ensuring a clean and organized installation.
Constructed with heavy-duty, long-life ball joints equipped with dust caps, these components are designed to meet Australian Design Rules (ADR) compliance, ensuring reliability and performance in demanding conditions.
For visual reference, please note that images are representative of the parts and may not correspond directly to the specific part number being viewed.
Features of Blackhawk UCA Range
- Fixed Caster correction providing a bulk, fixed amount of caster
- Ability to utilise the factory adjustment to fine tune the caster required for the vehicles lift
- Fixed position ball joint with housings rotated for maximum down travel
- Offset type UCA allows improved clearance to other suspension components and chassis
- Improved clearance with larger wheel and tyre setup
- Utilises OE specification ball joint & bushings for easy replacement or maintenance
- Tabs and mounts to secure ABS lines where applicable
- Heavy Duty Long Life Ball joints with dust cap
- Designed to meet ADR Compliance
Additional Information
- Please note images are only a representation of the parts and may not necessarily be the image of the part number you are viewing.
Blackhawk 4X4 Upper Control arms have been developed as an aftermarket solution to compliment raised suspension
High quality 4x4 suspension upgrades proudly sold by PPD Performance.
Shipping Policy
PPD Performance offer custom built suspension solutions, with unique adjustability and performance.
These kits are assembled to order to suit your requirements, with an average lead time that can vary between 1-3 days.
If you need a specific eta, please contact us before ordering and we will be sure to assist you.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Toyota Prado (2024-On) 250 Series 2024-Onwards Roadsafe Blackhawk Upper Control Arm Kit
UCA4861P
When a vehicle is equipped with raised suspension, it can disrupt the factory-set geometry, leading to issues such as reduced caster, bump steer, and clearance conflicts with other suspension components. To address these challenges, Roadsafe 4WD has engineered the Blackhawk Upper Control Arm (UCA) range, leveraging extensive experience in the manufacture and supply of chassis parts, including a comprehensive selection of steering and suspension components.
Key features of the Blackhawk UCA include fixed caster correction, which provides a substantial, fixed amount of caster. This design allows for the utilization of factory adjustments to fine-tune the caster necessary for the vehicle's lift, ensuring that the UCA does not limit increased droop in relation to other components.
The fixed position ball joint is designed with housings rotated to prevent it from being the limiting factor during maximum down travel. Additionally, the offset type UCA enhances clearance to other suspension components and the chassis, accommodating larger wheel and tire setups.
These UCAs utilize OE specification ball joints and bushings, facilitating straightforward replacement or maintenance as needed. Furthermore, they feature tabs and mounts to secure ABS lines where applicable, ensuring a clean and organized installation.
Constructed with heavy-duty, long-life ball joints equipped with dust caps, these components are designed to meet Australian Design Rules (ADR) compliance, ensuring reliability and performance in demanding conditions.
For visual reference, please note that images are representative of the parts and may not correspond directly to the specific part number being viewed.
Features of Blackhawk UCA Range
- Fixed Caster correction providing a bulk, fixed amount of caster
- Ability to utilise the factory adjustment to fine tune the caster required for the vehicles lift
- Fixed position ball joint with housings rotated for maximum down travel
- Offset type UCA allows improved clearance to other suspension components and chassis
- Improved clearance with larger wheel and tyre setup
- Utilises OE specification ball joint & bushings for easy replacement or maintenance
- Tabs and mounts to secure ABS lines where applicable
- Heavy Duty Long Life Ball joints with dust cap
- Designed to meet ADR Compliance
Additional Information
- Please note images are only a representation of the parts and may not necessarily be the image of the part number you are viewing.
Blackhawk 4X4 Upper Control arms have been developed as an aftermarket solution to compliment raised suspension
High quality 4x4 suspension upgrades proudly sold by PPD Performance.
Shipping Policy
PPD Performance offer custom built suspension solutions, with unique adjustability and performance.
These kits are assembled to order to suit your requirements, with an average lead time that can vary between 1-3 days.
If you need a specific eta, please contact us before ordering and we will be sure to assist you.
