Toyota Prado 250 (2025-) 40mm Lift Kit With Bilstein B6 Shocks
Toyota Prado 250 (2025+) 40mm Lift Kit – Bilstein B6 Shocks & King Springs | PPD Performance
Upgrade the ride, control, and ground clearance of your Toyota Prado 250 (2025+) with this premium 40–50mm suspension lift kit, featuring Bilstein B6 Offroad Shocks and King Springs. Designed for drivers who want superior on-road handling and off-road capability, this combination delivers the best of both worlds—with comfort, control, and load-handling performance.
Kit Inclusions:
-
2 x Bilstein B6 Offroad Front Struts
-
2 x Bilstein B6 Offroad Rear Shocks
-
2 x Front Raised King Coil Springs
-
2 x Rear Raised King Coil Springs
Why Choose Bilstein B6 Offroad Shocks?
Built for high-clearance, high-centre-of-gravity vehicles like 4WDs, Bilstein B6 Offroad dampers use advanced gas pressure technology to eliminate the uncontrolled movements typical of factory shocks. The result:
-
More precise handling
-
Reduced body roll
-
Enhanced cornering and lane-change stability
-
Fade-free performance on corrugations and long drives
These shocks are engineered for Australian conditions and provide consistent, reliable damping in all scenarios—from city streets to rugged tracks.
Why King Springs?
Australian-made King Springs use advanced X5K high-strength spring steel, offering:
-
Superior resistance to sag
-
Improved toughness and fatigue life
-
Better corrosion protection
-
Increased load-carrying ability
These coils are ideal for vehicles fitted with permanent accessories or used for towing and touring.
Lift Height & Spring Selection:
-
Approximate Lift Height: 40–50mm
-
Spring Rate Selection: Choose your front and rear load configuration to suit bullbars, canopies, drawers, or rear bars.
Constant Load springs are designed to handle fixed weight with optimal comfort and control.
📘 Need help choosing the correct load rating?
👉 Read our guide on spring rates and constant loads
Note: Actual lift may vary depending on accessories fitted and vehicle condition.
🔧 Recommended Upgrades for Maximum Control:
-
🔩 Tough Dog Upper Control Arm Kit
Corrects caster and camber post-lift. Ensures maximum clearance and alignment integrity. -
🛞 Tough Dog Front Adjustable Panhard Rod
Re-centres the axle after lifting for improved tracking and geometry correction. -
💨 Tough Dog Load Assist Airbags
Perfect for variable loads—adjust air pressure to level the rear when towing or carrying cargo.
🛠 PPD Performance Fitting Available
Have your suspension kit professionally installed at our Bibra Lake, WA workshop. Our expert team handles suspension alignment and full vehicle setup tailored to your load and application.
🚚 Affordable Freight, Australia-Wide
We deliver this kit nationwide with low-cost shipping—fast, secure, and fully insured to every corner of Australia.
🔧 Premium Ride. Aussie Tested. Installed by PPD Performance.
Product Information
Product Information
Shipping & Returns
Shipping & Returns

Toyota Prado 250 (2025-) 40mm Lift Kit With Bilstein B6 Shocks
Toyota Prado 250 (2025-) 40mm Lift Kit With Bilstein B6 Shocks
Toyota Prado 250 (2025+) 40mm Lift Kit – Bilstein B6 Shocks & King Springs | PPD Performance
Upgrade the ride, control, and ground clearance of your Toyota Prado 250 (2025+) with this premium 40–50mm suspension lift kit, featuring Bilstein B6 Offroad Shocks and King Springs. Designed for drivers who want superior on-road handling and off-road capability, this combination delivers the best of both worlds—with comfort, control, and load-handling performance.
Kit Inclusions:
-
2 x Bilstein B6 Offroad Front Struts
-
2 x Bilstein B6 Offroad Rear Shocks
-
2 x Front Raised King Coil Springs
-
2 x Rear Raised King Coil Springs
Why Choose Bilstein B6 Offroad Shocks?
Built for high-clearance, high-centre-of-gravity vehicles like 4WDs, Bilstein B6 Offroad dampers use advanced gas pressure technology to eliminate the uncontrolled movements typical of factory shocks. The result:
-
More precise handling
-
Reduced body roll
-
Enhanced cornering and lane-change stability
-
Fade-free performance on corrugations and long drives
These shocks are engineered for Australian conditions and provide consistent, reliable damping in all scenarios—from city streets to rugged tracks.
Why King Springs?
Australian-made King Springs use advanced X5K high-strength spring steel, offering:
-
Superior resistance to sag
-
Improved toughness and fatigue life
-
Better corrosion protection
-
Increased load-carrying ability
These coils are ideal for vehicles fitted with permanent accessories or used for towing and touring.
Lift Height & Spring Selection:
-
Approximate Lift Height: 40–50mm
-
Spring Rate Selection: Choose your front and rear load configuration to suit bullbars, canopies, drawers, or rear bars.
Constant Load springs are designed to handle fixed weight with optimal comfort and control.
📘 Need help choosing the correct load rating?
👉 Read our guide on spring rates and constant loads
Note: Actual lift may vary depending on accessories fitted and vehicle condition.
🔧 Recommended Upgrades for Maximum Control:
-
🔩 Tough Dog Upper Control Arm Kit
Corrects caster and camber post-lift. Ensures maximum clearance and alignment integrity. -
🛞 Tough Dog Front Adjustable Panhard Rod
Re-centres the axle after lifting for improved tracking and geometry correction. -
💨 Tough Dog Load Assist Airbags
Perfect for variable loads—adjust air pressure to level the rear when towing or carrying cargo.
🛠 PPD Performance Fitting Available
Have your suspension kit professionally installed at our Bibra Lake, WA workshop. Our expert team handles suspension alignment and full vehicle setup tailored to your load and application.
🚚 Affordable Freight, Australia-Wide
We deliver this kit nationwide with low-cost shipping—fast, secure, and fully insured to every corner of Australia.
🔧 Premium Ride. Aussie Tested. Installed by PPD Performance.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Toyota Prado 250 (2025+) 40mm Lift Kit – Bilstein B6 Shocks & King Springs | PPD Performance
Upgrade the ride, control, and ground clearance of your Toyota Prado 250 (2025+) with this premium 40–50mm suspension lift kit, featuring Bilstein B6 Offroad Shocks and King Springs. Designed for drivers who want superior on-road handling and off-road capability, this combination delivers the best of both worlds—with comfort, control, and load-handling performance.
Kit Inclusions:
-
2 x Bilstein B6 Offroad Front Struts
-
2 x Bilstein B6 Offroad Rear Shocks
-
2 x Front Raised King Coil Springs
-
2 x Rear Raised King Coil Springs
Why Choose Bilstein B6 Offroad Shocks?
Built for high-clearance, high-centre-of-gravity vehicles like 4WDs, Bilstein B6 Offroad dampers use advanced gas pressure technology to eliminate the uncontrolled movements typical of factory shocks. The result:
-
More precise handling
-
Reduced body roll
-
Enhanced cornering and lane-change stability
-
Fade-free performance on corrugations and long drives
These shocks are engineered for Australian conditions and provide consistent, reliable damping in all scenarios—from city streets to rugged tracks.
Why King Springs?
Australian-made King Springs use advanced X5K high-strength spring steel, offering:
-
Superior resistance to sag
-
Improved toughness and fatigue life
-
Better corrosion protection
-
Increased load-carrying ability
These coils are ideal for vehicles fitted with permanent accessories or used for towing and touring.
Lift Height & Spring Selection:
-
Approximate Lift Height: 40–50mm
-
Spring Rate Selection: Choose your front and rear load configuration to suit bullbars, canopies, drawers, or rear bars.
Constant Load springs are designed to handle fixed weight with optimal comfort and control.
📘 Need help choosing the correct load rating?
👉 Read our guide on spring rates and constant loads
Note: Actual lift may vary depending on accessories fitted and vehicle condition.
🔧 Recommended Upgrades for Maximum Control:
-
🔩 Tough Dog Upper Control Arm Kit
Corrects caster and camber post-lift. Ensures maximum clearance and alignment integrity. -
🛞 Tough Dog Front Adjustable Panhard Rod
Re-centres the axle after lifting for improved tracking and geometry correction. -
💨 Tough Dog Load Assist Airbags
Perfect for variable loads—adjust air pressure to level the rear when towing or carrying cargo.
🛠 PPD Performance Fitting Available
Have your suspension kit professionally installed at our Bibra Lake, WA workshop. Our expert team handles suspension alignment and full vehicle setup tailored to your load and application.
🚚 Affordable Freight, Australia-Wide
We deliver this kit nationwide with low-cost shipping—fast, secure, and fully insured to every corner of Australia.













